搜索结果: 1-10 共查到“电子科学与技术 deposition”相关记录10条 . 查询时间(0.046 秒)
Modelling a Deposition Process in Collective Construction
Deposition Process Collective Construction
2009/7/28
During collective construction tasks, swarm robots coordinate their actions in space and time to build structures that conform to some given design or specification. In this paper, a simulation model ...
Thin Films Formation of Organic Polymers by Photosensitized Pulsed Laser Deposition
PTFE PLD Graphite Photosensitized ablation
2009/6/9
To form thin films of organic functional polymers, we proposed a modified technique of pulsed laser deposition (PLD), photosensitized PLD. The feature of the technique is that ablation is brought abou...
Parametric Studies of Pulsed Nd:YAG Laser Deposition of ITO for OLED Application
Indium tin oxide Pulsed Nd:YAG laser Background gases OLED
2009/6/1
Device-quality ITO by pulsed Nd:YAG laser, successfully used for Organic Light Emitting Device (OLED), was deposited at room temperature and 250 °C. Although the optical transmittance of > 90% is achi...
Characteristics of ZnO Layers Grown on GaN Template Under Argon Pressure by Pulsed Laser Deposition
ZnO Pulsed Laser Deposition Buffer layer Annealing
2009/6/1
We employed epi-GaN substrates for ZnO film growth, and studied the deposition and post-annealing effects. ZnO films were grown by pulsed laser deposition (PLD) method. The as-grown films were anneale...
Growth Control of ZnO Nanorods by Pulsed Laser Deposition Method and Their Surface Enhanced Raman Scattering Properties
ZnO Pulsed Laser Deposition Nanorod
2009/6/1
ZnO nanorod arrays have attracted considerable attention as a candidate for fabricating gas sensors, dye-sensitized solar cells, and light emitting diodes (LEDs) in the last few years. Controlling the...
Synthesis of Vertically-Aligned ZnO Nanowires by Nanoparticle- Assisted Pulsed Laser Deposition and Their Application to Photo-Devices
ZnO Nanowire Laser ablation
2009/6/1
Vertically aligned ZnO nanowires have been successfully synthesized on annealed c-cut sapphire substrates by a catalyst-free nanoparticle-assisted pulsed-laser deposition (NAPLD) in Ar and N2 backgrou...
Substrate Effect on Plasma Clean Efficiency in Plasma Enhanced Chemical Vapor Deposition System
Substrate Effect Plasma Clean Efficiency Plasma Chemical Vapor Deposition System
2010/12/6
The plasma clean in a plasma-enhanced chemical vapor deposition (PECVD) system plays an important role to ensure the same chamber condition after numerous film depositions. The periodic and applicable...
Physical Properties of Sputtered Germanium-Doped Indium Tin Oxide Films (ITO: Ge) Obtained at Low Deposition Temperature
Sputtered Germanium-Doped Indium Tin Oxide Films Low Deposition Temperature
2010/12/16
Undoped and Ge-doped ITO films (ITO: Ge) deposited at low temperature (70℃) have been studied. Although both samples have the same carrier concentration, a higher carrier mobility occurs for ITO: Ge. ...
Protection of Photoanodes Against Photo-Corrosion by Surface Deposition of Oxide Films: Criteria for Choosing the Protective Coating
Photoanodes Photo-Corrosion Surface Deposition Oxide Films the Protective Coating
2010/12/21
Two strategies to solve the problem of instability of photoanodes against photocorrosion have been explored. The photocorrosion of photoanodes generally occurs when they enter the fabrication of effic...
Influence of Evaporation-Deposition Geometry on Conductive Thin Films
Evaporation-Deposition Geometry Conductive Thin Films
2011/1/21
There is a striking dependence of the evaporation deposition geometry (i.e. angular distribution of the incident vapor beam) on the properties of deposited conductive films. This paper discusses solde...