搜索结果: 1-9 共查到“机械工程 wear”相关记录9条 . 查询时间(0.02 秒)
Welcome to the 21st International Conference on Wear of Materials, which will take place in California, USA from the 26-30 March 2017.The conference will focus on both the fundamental and applied aspe...
Abrasive Wear Mechanisms of Sand Particles Intruding into ATM Roller-Scraper Tribosystem
Tribosystem Abrasive Wear Mechanism
2011/8/4
The roller-scraper tribosystem of Automatic Teller Machine (ATM) plays an important role in reliable cash requests. However, the abrasive wear of the polymer tribosystem becomes a prominent problem wh...
Modeling and predicting abrasive wear behaviour of poly oxy methylenes using response surface methodolgy and neural networks
abrasive wear poly oxy methylene neural network
2009/10/23
In this study, abrasive wear behaviour of poly oxy methylenes (POM) under various testing conditions was investigated. A central composite design (CCD) was used to describe response and to estimate th...
Wear Behaviour of Zinc-Aluminium Alloys and the Bearings Produced from these Alloys
Zinc-aluminum alloys journal bearings wear
2009/10/14
In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting. The wear behaviour of these alloys were investigated wi...
A study on Increasing the Wear and Impact Resistance of White Cast Iron Produced by Remelting X210Cr12 Tool Steel
Wear Wear rate per unit cost Hypo-eutectic white cast iron Abrasion resistant
2009/10/13
Wear is a serious problem in the components of machinery, particularly those used in the mixing and crushing of soil, cement, glass, bricks, etc. Excessive wear causes a consequential increase in the ...
Wear of ceramic tools in hard machining
Ceramics and glasses Wear resistance Hard machining
2010/2/8
Purpose: The principle purpose of this investigation is to recognize the wear phenomenon of the mixed ceramic tips against 60 HRC alloy steel specimens in dry and hard turning operations. This knowled...
Abrasive wear of high chromium Fe-Cr-C hardfacing alloys
hardfacing alloy abrasive wear Pin-on-disk carbide
2014/2/27
Weld deposits are one of the most used economical ways of the wear resistance increase. The study compares the characteristics of the overlay material welded-on and the abrasive wear resistance. The r...
Purpose: The paper presents investigation results of structure and properties of the cemented carbide tips and cermet tools, both uncoated and coated with single and multiple hard surface layers in th...
A Modification of SOM Network(SLFM)and Its Application in Tool Wear Monitoring and Quality Control
2007/7/28
期刊信息
篇名
A Modification of SOM Network(SLFM)and Its Application in Tool Wear Monitoring and Quality Control
语种
英文
撰写或编译
撰写
作者
Zhu Mingquan; Cai Yongxia
第一作者单位
刊物名称
Plant Engineering and Management
页面
出...