搜索结果: 1-14 共查到“冶金工程技术 aluminium”相关记录14条 . 查询时间(0.108 秒)
澳大利亚铝业协会（Australian Aluminium Council）
澳大利亚铝业协会 Australian Aluminium Council Bauxite mining Alumina refining
2012/7/9
The Australian Aluminium Council is the peak industry association representing the Australian aluminium industry. The Council's members are the companies operating in each of the following sectors。
欧洲铝箔协会（European Aluminium Foil Association，EAFA）
欧洲铝箔协会 European Aluminium Foil Association EAFA
2012/4/20
The European Aluminium Foil Association (EAFA) is made up of more than 120 members from 24 countries throughout Western, Central and Eastern Europe. The membership comprises foil rollers (in all thick...
The European Aluminium Association (EAA) was founded in 1981 and represents the aluminium industry in Europe. It encompasses primary aluminium producers, downstream manufacturers, producers of recycle...
Japan Aluminium Federation merged with Japan Light Metal Association to form Japan Aluminium Association on 1999.it is Promotioning of demand for aluminum and its products and son.
Aluminium Association of India, was founded in 1981 to cater the needs of Indian Aluminium Industry and to interface with various aluminium industries world over. AAI is the apex body representing the...
国际铝业协会（International Aluminium Institute，IAI）（图）
国际铝业协会 International Aluminium Institute IAI
2012/4/5
The IAI is the Global Forum of the world's Aluminium Producers. The Institute has 27 Member companies and they are represented on the IAI Board of Directors by their CEO's. Together the IAI Member Com...
The low-aluminium cast iron of reduced silicon content treated with cerium mischmetal
Metallography Low-aluminium cast iron Spheroidization
2011/3/15
The work presents the effect of cerium mischmetal used in quantities of 0.1 and 0.2 wt-% and ferrosilicon used in quantities from 0.5% to 1.5% on the alloy matrix and the shape of graphite precipitate...
Physical model of aluminium refining process in URC-7000
aluminium refining physical modelling
2009/10/23
The paper presents short characteristics of the most frequently used reactors for the continuous refining of aluminium and its alloys. Refining depends on the flow rate of refining gas. It influences ...
Effect of Alloying Elements to Aluminium on the Wettability of AL/SiC System
Wetting Sessile drop method Surface tension Aluminium alloys
2009/10/13
The wettability at a liquid Al-alloy/SiC interface was evaluated by the sessile drop method at 750C. The wetting angle, , of a sessile drop on SiC substrate decreased with the addition of Pb, Mg and...
Directionality in the Mechanical Properties of Spray Cast and Extruded 7XXX Series Aluminium Alloys
Spray casting aluminium alloys Texture Mechanical properties X-ray di raction
2009/10/12
Three 7xxx series aluminium SS70, N707 and 7075 alloys have been produced by the spray deposition process. The alloys were extruded and subsequently heat treated in the T6 and T7 temper conditions. Te...
Influence of aluminium on the formation of pinholes in cast irons
Defect of castings Pinholes Cast iron with compacted graphite
2011/3/15
Purpose: This study concerns the formation of pinholes in castings by reaction between cast iron with compacted graphite and green sand mould.
Modelling of semi-liquid aluminium flow in extrusion
Innovative materials and foundry technologies thixoforming
2011/3/10
Experimental modeling using substitute materials is usually a simply way to obtain satisfacted results. This kind of experiment is characterizing by low cost. The significant results may be quickly ap...
CONTINUOUS SODIUM MODIFICATION OF NEARLY-EUTECTIC ALUMINIUM ALLOYS. PART II. EXPERIMENTAL STUDIEM
modification continuous modification
2011/3/10
One of the possible means of continuous sodium modification of nearly-eutectic alloys may be continuous electrolysis of sodium compounds (salts), taking place directly in metal bath (in the crucible)....
CONTINUOUS SODIUM MODIFICATION OF NEARLY-EUTECTIC ALUMINIUM ALLOYS. PART I. THEORETICAL BACKGROUNDS OF THE PROCESS
modification continuous modification beta-alumina
2011/3/10
One of the possible techniques of continuous sodium modification of nearly-eutectic alloys is continuous electrolysis of sodium compounds (salts), taking place directly in metal bath (in crucible). Fo...