搜索结果: 1-15 共查到“林业工程 Carbon”相关记录16条 . 查询时间(0.093 秒)
Enhanced performance of rosin-based epoxy composites mixed with carbon nanotubes and cork powders from oriental oak bark
Rosin Epoxy resin Carbon nanotubes Cork powders Thermal properties Mechanical properties
2024/1/12
Rosin-based epoxy composites with high-impact toughness, tensile strength, modulus, and excellent flame retardance were prepared through a simple and effective approach. In this study, rosin-based epo...
Recent advances in carbon-based nanomaterials for?flame retardant?polymers and composites
Graphene Polymer Flame retardant Nanocomposite carbon nanomaterials Flammability
2023/12/18
An urgent need is to reduce the?flammability?of polymers and manage their toxic thermal?decomposition?products. Although conventional halogenated, metallic and phosphorus-based?flame retardants?(FRs) ...
Thermal Degradation Behavior of Epoxy Resin Containing Modified Carbon Nanotubes
epoxy resin carbon nanotubes silicone thermal degradation flame retardancy activation energy
2023/12/1
Via the surface-grafting of carbon nanotubes (CNTs) with a silicon-containing flame retardant (PMDA), a novel flame retardant CNTs-PMDA was synthesized. The flame retardancy was tested by cone calorim...
Bio-based epoxy vitrimer for recyclable and carbon fiber reinforced materials: Synthesis and structure-property relationship
Vitrimer Epoxy-acid-anhydride system CFRMs Degradable Recycling
2023/11/30
Recycling or degradation of epoxy resins is difficult because of their covalent cross-linking structures, which causes resource crisis, environmental pollution, and resource waste. To address this cha...
Mechanical properties of carbon nanotubes/epoxy nanocomposites: Pre-curing, curing temperature, and cooling rate
Carbon nanotubes curing epoxy mechanical properties nanocomposites polymer nanocomposites
2023/11/30
The effects of composite fabrication, such as pre-curing, curing temperature, and cooling rate, were studied. In this work, the pre-curing was defined as heat treatment of Multi-Walled Carbon Nanotube...
Carbon fiber-reinforced epoxy composite properties improvement by incorporation of polydopamine sizing at fiber-matrix interface
CF EP composites Interface polydopamine sizing
2023/11/16
To gain better interfacial and mechanical performances of carbon fiber-reinforced epoxy resin (CF/EP) composites, the surface modification of CF was carried out via a simple mild method. The polydopam...
Deterioration mechanism of hydrothermal aging on the properties of carbon fiber/epoxy composites in various media
Hydrothermal aging resin composite degradation mechanical property
2023/11/16
This study examined the hydrothermal aging mechanism of carbon fiber reinforced epoxy resin (CF/EP) composites in acidic, alkaline, salt solution, and deionized water (marked as Ac-CF/EP, Al-CF/EP, Sa...
Estimating the aboveground carbon sequestration and its economic value (case study: Iranian Caspian forests)
allometric equation economic value of carbon density of wood forest inventory
2018/3/6
The aim of the study is to estimate the aboveground carbon sequestration and to determine the economic
value of forests in carbon sequestration as a way of mitigating climate change. This research wa...
Biomass and carbon stocks in Schima superba dominated subtropical forests of eastern China
carbon stocks evergreen broadleaved forest
2015/5/5
Quantitative relationships between stand indices and carbon dioxide (CO2) stocking are missing in the
evergreen broadleaved forests (EBLFs) in eastern China and this hinders to estimate carbon (C) b...
Wood–a carbon depot
carbon cycle carbon dioxide carbon sink wood
2009/11/26
The article examines the global movement of carbon dioxide, the most important greenhouse gas due to its large quantities. We studied the carbon cycle with possibilities of its extension, and analysed...
Preparation of Porous Bamboo Carbon by Low-Temperature Activation in Air
bamboo carbonization air oxidation ash potassium
2009/11/23
Bamboo carbon was prepared in N2 flow for 2 hours at 500 °C with heating rates from 7 °C/min to 39 °C/min, resulting in a BET surface area ranging from 28 to 252 m2/g, respectively. For the next step,...
Influence of Heartwood Extractives on Carbon Content Variations Among Clones in the Heartwood of Sugi（Cryptomeria japonica）
sugi broad-sense heritability extractives carbon content variation
2009/3/6
Heartwood extractives of Sugi (Cryptomeria japonica D. Don) had large variations among clones and high broad-sense heritability. Genetic improvement by selection of clones having large quantities of ...
Guidebook for the formulation of afforestation / reforestation and bioenergy projects in the regulatory carbon market
Guidebook for the formulation afforestation reforestation bioenergy projects regulatory carbon market
2014/3/6
The purpose of this guidebook is to serve as guidance for those interested in developing land-use change, forestry and bio-energy projects under the Clean Development Mechanism (CDM) of the Kyoto Prot...
Cultivation and Utilization of Japanese Fast Growing Trees with High Capability for Carbon Stock I.
Melia azedarach fast growing tree wood properties specific gravity pruning
2009/3/6
Wood properties and their variation in the stem of 17-year-old Melia azedarach trees, which grew fast and had straight stem forms due to pruning, were investigated to clarify the potential of this sp...
Adsorption and Photocatalytic Characteristics of Activated Carbon Made from TiO2-coated Woody Waste
TiO2 activated carbon adsorption photocatalytic ability sol-gel method
2009/3/6
Composite powder materials consisting of activated carbon and TiO2 were prepared through the carbonization of woody waste powders coated with TiO2 gel by using the sol-gel method. The effect of the co...