搜索结果: 1-8 共查到“工学 Deformation analysis”相关记录8条 . 查询时间(0.125 秒)
DATUM FEATURE EXTRACTION AND DEFORMATION ANALYSIS METHOD BASED ON NORMAL VECTOR OF POINT CLOUD
Deformation Analysis Point Cloud Normal Vecto Datum Feature Cubic B-spline Curve
2018/5/15
In order to solve the problem lacking applicable analysis method in the application of three-dimensional laser scanning technology to the field of deformation monitoring, an efficient method extractin...
MONITORING AND DEFORMATION ANALYSIS OF GROYNES USING TLS AT THE RIVER ELBE
3D Deformation Groyne Monitoring Point Cloud Library (PCL) TLS
2016/11/11
To enter the Port of Hamburg, one of Europe’s busiest ports all vessels need to navigate around 145 km along the Elbe river, a tide influenced navigation channel. To protect the Elbe shoreline from er...
Preserve the Past for the Future-Terrestrial Laser Scanning for the Documentation and Deformation Analysis of Easter Island′s Moai
Acquisition Cultural Heritage Deformation
2015/12/16
Since 1995, the Moai of Easter Island, the island’s huge volcanic rock statues, have been protected as UNESCO (United Nations
Educational, Scientific and Cultural Organization) World Cultural Heritag...
First Experiences with the Deformation Analysis of a Large Dam Combining Laserscanning and High-Accuracy Surveying
Civil Engineering Laserscanning Surveying Deformation Analysis
2015/11/13
Monitoring the static and dynamic behaviour of large dams has always been a topic of great importance, due to the impact these structures have on the whole landscape where they are built. Many instrum...
Deformation analysis of a bored tunnel by means of terrestrial laserscanning
Terrestrial laser scanning point cloud modeling tunnel deformation detection
2015/8/24
A procedure is developed, implemented and tested to detect deformations in a bored tunnel. Deformations can occur after construction of the tunnel is nished, i.e. between two measurement epochs, but a...
Deformation Analysis of Elastic-Plastic Two Layer Tubes Subject to Pressure: an Analytical Approach
Composite tubes Elastoplasticity strain hardening Tresca's criterion
2009/10/12
Analytical solutions are obtained for axisymmetric elastic-plastic deformations in tightly tted concentric tubes with xed ends subjected to either internal or external pressure. Tresca's yield crite...
Deformation Analysis of Woven Fabrics for Chair Seat Surface
Textile Yarn Weave structure Finite element method
2009/4/22
In today's office environment, the demand over a feeling of sitting is increasing by the spread of IT equipment. Because evaluation of human's feeling of sitting is difficult, this study proposes num...
The deformation analysis of 1008 steel at 0.01/s strain rate
Ductility Hot ductility curves True flow curves
2010/2/9
Purpose: The hot ductility investigations under strain rate 0.01/s were shown in this work.. The investigations were carried out on the low carbon-manganese steel 1008 with addition of boron.Design/me...