搜索结果: 1-15 共查到“Composite Material”相关记录15条 . 查询时间(0.093 秒)
One-step self-assembly fabrication of three-dimensional copper oxide/graphene oxide aerogel composite material for supercapacitors
Graphene oxide aerogel CuO Supercapacitor Self-assembly
2023/6/21
A cylindrical composite material of three-dimensional copper oxide/graphene oxide aerogel (3DCuO/GOA) has been successfully synthesized as a supercapacitor electrode material by a convenient one-step ...
Mechanical properties of composite material reinforced with textile waste from the process of tyres recycling
epoxy resin quality testing microfiber testing
2016/9/2
The paper deals with the polymeric fibre composite with the reinforcement on the basis of the waste from the process of the tyres recycling. The aim of the research was the use of the material of clea...
Photodegradation of Molasses by a MoO3-TiO2 Nanocrystalline Composite Material（图）
sol-gel molybdenum oxide titanium oxide photodegradation molasses pollution control
2013/10/9
A MoO3-TiO2 nanocrystalline composite material was prepared by a simple sol-gel method. The synthesized material was characterized by X-ray diffraction, scanning electron microscopy with an electron d...
Preparation of Nano-TiO2/Fly Ash Beads Composite Material and Photocatalytic Properties
Composite Fly Ash Bead Hydrolysis Nano-TiO2 Photocatalytic
2011/11/14
Using TiCl4 as the titanium source, urea as the precipitating agent, nano-TiO2/fly ash beads composite materials were prepared by hydrolysis-precipitation method. The materials were characterized by S...
Research on Photocatalysis Properties of Nano TiO2/Mica Composite Material Prepared by the Method of Hydrolysis–Precipitation
Composite Material Hydrolysis – Precipitation Photocatalyst TiO2/M
2011/11/14
Using muscovite as the carrier, TiCl4 as the source of titanium, urea as the precipitating agent, nano-TiO2/mica photocatalyst (TiO2/M) was prepared by the method of hydrolysis–precipitation. The as -...
Adsorption Analysis of Cr(VI) by Fly Ash Composite Material in Aqueous Medium
Batch Adsorption Process Composite Material Cr(VI) Fly Ash (FA)
2011/11/22
The adsorption technique using fly ash composite material has been applied for the removal of Cr(VI) from aqueous samples. Batch experiments have been carried out for the adsorption of Cr(VI) onto fly...
Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
Indirect composite Primer Silver-palladium-copper-gold alloy
2010/11/26
The purpose of this study was to evaluate the effect of primers on bonding between a silver-palladium-copper-gold alloy and an indirect composite material. Cast disks were air-abraded with alumina, co...
秸秆纤维墙体结构高温性能和火灾温度场研究（Research in High Temperature Performance and Fire Temperature Field of Straw Fiber Composite Material）
秸秆纤维轻质墙体 高温性能 火灾 温度场 模型
2009/11/24
以秸秆纤维轻质墙体为研究对象，分析其结构和组成及其对材料高温性能的影响；通过TG-FTIR分析，研究了高温作用下的秸秆纤维墙体材料的物理化学变化过程。在上述基础上，针对该种新型建筑材料进行了烧失量实验，利用DRS2.6数据回归分析软件，建立了火灾温度-烧失量的一元回归模型。同时，以200mm厚的秸秆纤维外墙保温板为例，在ISO9705标准火灾实验间对温度-烧失量回归模型进行了校验。结果表明：回归方...
An Uncertainty Method for Moisture Concentration Assessment in Composite Material Plates T300/5208 under Hygrothermal Conditions Effects
Composite materials Hygrothermal behavior Aging Reliability analysis Environmental cyclic conditions
2009/9/30
Matrix polymer composite materials are increasingly required especially for high-performance applications.Sadly, these materials are subjected to degradation in a given environment. Indeed, the aromat...
Effect of Ceramic Coating by Aerosol Deposition on Abrasion Resistance of a Resin Composite Material
Abrasion resistance Surface modification Resin composite
2009/9/15
Aerosol deposition (AD coating) is a novel technique to coat solid substances with a ceramic film. The purpose of the present study was to investigate the effect of AD coating on abrasion resistance o...
Stress Analysis of Clasps Made of Glass Fiber-reinforced Composite Material Using Three-dimensional Finite Element Method: Influence of Shape in Cross and Longitudinal Sections of Circumferential Clasp Arms
Glass fiber-reinforced composite Clasp arm shape Finite element method
2009/9/14
The purpose of this study was to investigate the effects of different cross-sectional shapes and presence of taper on stress distribution in clasp arms made of glass fiber-reinforced composite (FRC) m...
Manufacture Method and Mechanical Properties of Composite Material based on Natural Mineral Fibres and Biodegradable Resin
Natural mineral fibres Biodegradable resin Processing method
2009/4/13
Environmental problems caused by extensive use of polymeric materials arise mainly owing to lack of landfill space and depletion of finite natural resources of fossil raw materials like petroleum or...
Effective Thermal Conductivity of Plain Weave Fabric and its Composite Material Made from High Strength Fibers
Effective thermal conductivity High strength fiber Composite
2009/4/13
Structural models of yarn, plain weave fabrics, and plain weave fabric/resin composites were derived and theoretical formulas for the effective thermal conductivity were developed from these models. ...
Spectrum absorption and luminescence methods were used to investigate the peculiarities of optical properties of compound material consisting of nanoporous silica with impregnated gold nanoparticles s...
Influence of loading on wear of composite material FeAl-Al2O3
innovative materials and foundry technologies foundry composite
2011/3/10
In the paper, the authors showed the results of studies on influence of production conditions on composite material properties during intermetalic phase Fe-Al reinforced by Al2O3 particles.