搜索结果: 1-10 共查到“土木建筑工程 girder”相关记录10条 . 查询时间(0.058 秒)
PERFORMANCE EVALUATION OF EXISTING STEEL AND CONCRETE GIRDER BRIDGES THROUGH NON-DESTRUCTIVE LIVE-LOAD TESTING
EXISTING STEEL CONCRETE GIRDER BRIDGES NON-DESTRUCTIVE LIVE-LOAD TESTING
2014/10/22
Traditional evaluations of a bridge behavior are based upon assumptions of material properties, load distributions in the bridge deck, any quantified structural damage from visual inspections, and the...
Seismic design force for single-span slab-girder skewed bridges
Skewed bridge slab-girder seismic analysis cross-frame elastomeric bearing
2009/2/20
This paper investigates the validity of seismic design force recommended by AASHTO for single-span bridges. The prescribed force is equal to the products of soil factor , acceleration and tributary we...
Analysis and shape optimization of variable thickness box girder bridges in curved platform
Department of Civil Engineering, University of Gaziantep
2009/2/19
This paper deals with the development of reliable and efficient computational tools to analyze and find optimum shapes of box girder bridges in curved platform in which the strain energy or the weight...
In design of conventional bridges the gap between bridge spans is usually only a few centimetres. For such an expansion joint poundings between adjacent bridge girders during strong earthquake shaking...
A METHOD FOR CRACK WIDTH EVALUATION OF CONTINUOUS COMPOSITE GIRDER BRIDGES ACCOUNTING FOR SHEAR-LAG
continuous composite bridge crack width control effective width
2009/1/4
A numerical procedure for crack width evaluation of steel-concrete composite girder bridges under negative bending moment is proposed. The procedure is combination of 3-dimensional finite element (FE...
A METHOD FOR CRACK WIDTH EVALUATION OF CONTINUOUS COMPOSITE GIRDER BRIDGES ACCOUNTING FOR SHEAR-LAG
continuous composite bridge crack width control effective width
2008/12/31
A numerical procedure for crack width evaluation of steel-concrete composite girder bridges under negative bending moment is proposed. The procedure is combination of 3-dimensional finite element (FE...
PRACTICAL ANALYSIS METHODS FOR CONTINUOUS GIRDER AND CABLE STAYED BRIDGES COMPOSED OF BEAMS WITH CORRUGATED STEEL WEBS
composite structure corrugated steel web continuous girder extradosed bridge cable stayed bridge
2008/12/29
A developed form of the PC box girders using corrugated steel web are flourishingly under construction. The form has been used for the continuous girders and the usage to be developed even for the ca...
CAUSE IDENTIFICATION OF FATIGUE CRACKS IN PLATE GIRDER-ON-STEEL FRAME PIER BRIDGE
plate girder steel frame pier fatigue crack finite element method
2008/12/26
The purpose of this study is to identify the causes of fatigue cracks found in a plate girder-on-steel frame pier bridge. The complexities of this type of structure make the stress configurations nea...
ELASTO-PLASTIC ANALYSIS OF PC GIRDER WITH CORRUGATED STEEL WEB BY AN EFFICIENT BEAM THEORY
corrugated steel web elasto-plastic analysis extended shear deformable beam theory
2008/12/23
The pre-stressed concrete girders with corrugated steel webs (PCGCSW) are known for their numer-ous advantages, including the accordion effect, a high shear strength etc. However, the mechanical anal...
RESPONSE CHARACTERISTICS OF BRIDGE ABUTMENTS SUBJECTED TO COLLISION OF GIRDER DURING AN EARTHQUAKE
seismic design girder abutment collision
2008/12/22
In a bridge which is equipped with a rubber bearing support and undergoes relatively large displacement of its girders during an earthquake, the girder and abutment collide in the case that the expan...