搜索结果: 1-10 共查到“纺织科学技术 Forming”相关记录10条 . 查询时间(0.453 秒)
The papers in this publication are printed as they were presented or published,
without alteration. Any advertisements may be out of date , and have been included to
facilitate publication. The A ...
Forming Conditions and Mechanical Properties of Potato Starch Films
potato starch film aqueous solutions mechanical properties
2009/6/16
Presented herein are the results of investigations into the preparation of starch solutions
and casting of film thereof. It was found that a dissolving temperature of 95 °C, time of
60 minutes, and ...
A Computational Fluid Dynamics Modeling and Experimental Study of the Mixing Process for the Dispersion of the Synthetic Fibers in Wet-Lay Forming
Mixing Process Synthetic Fibers Wet-Lay Forming
2009/3/6
In this paper, we present results from a computational fluid dynamics (CFD) model for the mixing process used to disperse synthetic fibers in wet-lay process. We used CFD software, FLUENT, together wi...
Fibers Caught in the Knuckles of the Forming Wires: Experimental Measurements and Physical Origins of the Force of Peeling in the Hydroentanglement Process
Peeling Hydroentanglement Process Physical Origins
2009/3/6
In hydroentanglement process, very fine water jets with high pressure impinge on the fiberweb, which is supported by forming wires. The impact of the jets causes fiber entanglement in the fiberweb and...
Producing Wound Dressing Materials from Chitin Derivatives by Forming Nonwovens Directly from Polymer Solution
dibutyrylchitin electrospinning spraying of polymer solution
2009/2/16
Dibutrylchitin is an ester derivative of chitin, characterised by good biomedical properties. Therefore, it can be used as a raw material for wound dressings. The high solubility of dibutyrylchitin in...
Influence of Forming Conditions on the Tensile Strength Properties of PAN Fibres Containing a Ferromagnetic Nanoaddition
nanoaddition ferromagnetics fibre spinning fibre drawing supermolecular structure
2009/2/13
This article presents the manufacturing conditions of polyacrylonitrile (PAN) fibres with ferromagnetic properties. These properties are obtained as the result of incorporating a Fe3O4 nanoaddition in...
Pneumatic Loom for Leno Weaves with Rotary Mechanism Forming the Shed and Beat-up of the Weft
weaving loom leno weave shed forming mechanism weft beat-up mechanism
2009/2/11
We present herein a genuinely new concept for a rotary mechanism for pneumatic looms, which forms the shed and beating-up the weft, together with an electromagnetic device to drive the guide needle ba...
New Employment of Integrating Structure Factor for Investigation of Fabric Forming
woven fabrics integrating structure factor reed dent weave factor
2009/2/8
In this article, new possibilities for employing the integrating fabric structure factor ϕ proposed by Vytautas Milašius are presented. The integrating structure factor ϕ in separate de...
Evaluation of the Suitability of Some Biodegradable Polymers for the Forming of Fibres
biodegradable copolyesters fibre-grade copolyesters biodegradable fibres
2009/2/7
Commercially available biodegradable, thermoplastic resins were evaluated as candidates raw material in the melt spinning of fibres. The aliphatic copolyester Bionolle made by Showa Co and the aliphat...
Synthesis of Loop-Forming Mechanisms of the KINEMAT 200 Machine for Non-Woven Coverings
non-woven covering loop-forming mechanism mini-max design,
2009/2/5
The paper presented concerns the design of the kinematics of the loop-forming mechanisms
of a machine for non-woven coverings. Two eight-link mechanisms are optimised by means
of the mini-max Chebys...