工学 >>> 光学工程 >>> 光电子技术 光信息技术 光学仪器及技术
搜索结果: 1-15 共查到光学工程 Solid相关记录30条 . 查询时间(0.14 秒)
第十六届固态照明和LED照明系统国际会议(Sixteenth International Conference on Solid State Lighting and LED-based Illumination Systems)。
Within the next 25 years, SSL will become the cornerstone of a revolution in lighting. Incandescent and gas discharge lamps will be replaced by highly efficient organic and inorganic semiconductor dev...
This article introduces usage of 3D solid modeling methods in order to represent and visualize highly complex environments such as large heterogeneous sites integrating urban and rural heritage cont...
Comprehensive analyses based on the rigorous vector diffraction theory were used to simulate the polarized readout signals using a solid immersion lens (SIL) in reading phase change (PC) disks. For an...
Power-conversion efficiency reduction on a quasi-homogeneous solid multi-core fiber is numerically investigated. The fiber length dependence of measured crosstalk of fabricated fibers is in good agree...
Solid photonic bandgap fibers offer distributed spectral filtering with extraordinarily high suppression. This opens new possibilities of artificially tailoring the gain spectrum of fibers. We present...
We describe the fabrication and characteristic of an all-solid photonic bandgap fiber with loss as low as 0.41dB/km at 1550nm within the first-order bandgap. The control of bandgaps,dispersion and ben...
We describe the effects of fabrication process timing and preform exposure to atmospheric air on spectral attenuation in photonic crystal fibers. The lowest attenuation is achieved by rapid processing...
We demonstrate how all-solid single-trench-assisted (ultra-) bend-insensitive fibers meet the FTTH market requirements and growing needs. High manufacturing robustness,excellent splicing performances ...
We demonstrate a four-wave mixing based wavelength conversion scheme at 1.55μm in a 1.5m long highly nonlinear, dispersion tailored one-dimensional (1D) soft glass microstructured optical fibre.
Linearly-polarized lasing at 1180 nm is demonstrated by utilizing polarization maintaining Yb-doped solid photonic bandgap fiber. The extinction ratio of the output light between two lineary-polarized...
We fabricate and characterize an all-solid photonic bandgap fibre with ultra-low transmission loss of 0.65dB/km within the firs-order bandgap band of 1500~1600nm. The bending characteristic of the fib...
We report on a new fiber design: an ytterbium-doped single-mode all-solid photonic bandgap fiber with a MFD of 18 micrometers. This fiber design has the potential for scaling to larger MFD.
We propose a novel concept of cladding structure in all-solid photonic bandgap fibers. It promises low bending and confinement losses with single-mode operation. The mechanism is based on the new conc...
We have developed an all-solid-state laser with high energy pulses and high brightness. In 2001 fiscal year, we produced the average output power of 1050 W with the beam-quality of about 8 times the d...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...