搜索结果: 1-11 共查到“金属材料 wear”相关记录11条 . 查询时间(0.065 秒)
The application of statistical models in wear resistance simulations of Al-Al2O3 composites
Composites Infiltration Simulation Statistical models
2010/8/17
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
Wear Resistance of Gold Alloys for Coinage.
Friction and Wear Performance of Gold and Gold Alloy Films.
The Abrasive Wear of Gold Jewellery Alloys.
Evaluating the Effects of High Velocity Oxy-Fuel (Hvof) Process Parameters on Wear Resistance of Steel-Shaft Materials
Statistical Modeling Design of Experiments High Velocity Oxy Fuel (HVOF)
2010/1/15
Thermal spray processes are widely used in industries to compensate for worn surfaces of different power transmission steel shafts. These include plain carbon, alloyed and stainless steels. This comes...
Analysis of the structure of castings made from chromium white cast iron resistant to abrasive wear
Inoculation Chromium cast iron Boron carbide Chromium carbide
2011/4/1
It has been proved that an addition of boron carbide and disintegrated steel scrap introduced as an inoculant to the chromium white cast iron changes the structure of castings. The said operation inc...
Mechanical properties and wear resistance of magnesium casting alloys
Heat treatment Mechanical properties Fracture mechanics
2010/2/4
Design/methodology/approach: A casting cycle of alloys has been carried out in an induction crucible furnace using a protective salt bath Flux 12 equipped with two ceramic filters at the melting tempe...
Sliding wear behaviors of electrodeposited Ni composite coatings containing micrometer and nanometer Cr particles
Ni-Cr composite coating electrodeposition microhardness wear
2010/3/17
Micrometer and nanometer Cr particles were co-deposited with Ni by electroplating from a nickel sulfate bath containing a certain content of Cr particles. Cr microparticles are in a size range of 1...
Slurry wear characteristics of zinc-based alloys: Effects of sand content ofslurry, silicon addition to alloy system and traversal distance
zinc-based alloys slurry wear behaviour material removal mechanisms erosion− corrosion− abrasion
2010/3/17
This investigation deals with the observations pertaining to the effects of specimen and slurry compositions as well as traversal distance on the slurry wear response of a zinc-based alloy. The compos...
Corrosion and wear behaviors of Al-bronzes in 5.0% H2SO4 solution
Al-bronze corrosion friction wear strain hardening
2010/3/17
Steady-state corrosion and wear behaviors of two Al-bronzes, Cu-14Al-X and QAl9-4, in 5.0% H2SO4 solution were investigated. It is found that wear loss of bronzes in 5.0% H2SO4 solution is lower than ...
Low friction and wear resistant coating systems on Ti6Al4V alloy
Surface treatment Glow-discharge treatment Duplex treatment
2010/2/8
Purpose: Development of an original multiplex hybrid treatment of Ti6Al4V alloy: diffusion hardening+intermediate hard gradient TiCxNy layer with use of continuous CAE+top low friction and wear resist...