搜索结果: 1-9 共查到“材料科学 Melting”相关记录9条 . 查询时间(0.114 秒)
Thermal barrier ZrO2 - Y2O3 obtained by plasma spraying method and laser melting
Composites Thermal barrier coatings Air plasma spraying
2009/12/3
Purpose: The aim of the paper is to determine the influence of laser melting upon the selected physical properties of ZrO2 - Y2O3 ceramic coatings deposited by APS (Air Plasma Spraying) method on supe...
Physical and technological preconditions of melting-crystallisation temperature stabilisation
Metallic alloys Heat treatment Melting Structure Modification
2009/12/2
Purpose: The precise temperature measurements need the using of temperature reference points - „temperature
fixpoints” (TFP). The increase of measuring temperature interval and other reasons re...
Low Melting Carat Gold Brazing Alloys for Jewellery Manufacture
Alloys Jewellery Manufacture
2009/7/30
Low Melting Carat Gold Brazing Alloys for Jewellery Manufacture.
Development of the fundamentals of melting and casting technology of Al-Me (Cr, Ni, Mo, W, Ti) master alloys used for modification of microstructure in silumins
The theoretical basis for casting processes silumins thermal analysis analysis of phase
2011/3/30
The study presents the technological backgrounds of the process of melting and casting Al-Cr, Al-Ni, Al-Mo, Al-W and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basin...
Development of the fundamentals of melting and casting technology of Al-Me (Cr, Ni, Mo, W, Ti) master alloys used for modification of microstructure in silumins
The theoretical basis for casting processes silumins thermal analysis analysis of phase
2011/3/30
The study presents the technological backgrounds of the process of melting and casting Al-Cr, Al-Ni, Al-Mo, Al-W and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basin...
Registration of melting and crystallization process of MCMgLi8Ca5 alloy with use of ATND method
Magnesium alloys crystallization Mg-Li alloy ATND
2011/3/30
Among lightweight metal alloys, magnesium is the lightest structural material with density of 1.74 g/cm3, having many attractive physical and mechanical properties combined with processing advantages....
Registration of melting and crystallization process of MCMgLi8Ca5 alloy with use of ATND method
Magnesium alloys crystallization Mg-Li alloy ATND
2011/3/30
Among lightweight metal alloys, magnesium is the lightest structural material with density of 1.74 g/cm3, having many attractive physical and mechanical properties combined with processing advantages....
An innovative energy-saving in-flight melting technology and its application to glass production
in-flight melting thermal plasmas heat transfer powders glass production
2010/10/13
The conventional method used for glass melting is air-fuel firing, which is inefficient,
energy-intensive and time-consuming. In this study, an innovative in-flight melting technology
was developed ...
Influence of melting and filtration processes on the structure and mechanical properties of aluminum alloys
Innovation materials and casting technologies Silumins
2011/3/15
In the article are presented the results of the study on the applied upgrading processes such as refining, modification and filtration of the near eutectics alloy EN AC- 44000, AlSi11, (AK11), cast in...