搜索结果: 1-15 共查到“材料科学 Fabrication”相关记录26条 . 查询时间(0.046 秒)
Fabrication of hierarchical core-shell AlPO4@Al(OH)(3) with high flame-retardant performance
AlPO4@Al(OH)(3) Flower-like shell In-situ growth Flame retardant Ceramic char residues
2023/6/21
A high-efficient composite of flame retardant (CFR) composed of an aluminum hydroxide (ATH) core and an aluminum phosphate (AP) flower-like shell was synthesized by an in-situ growth method, which is ...
One-step self-assembly fabrication of three-dimensional copper oxide/graphene oxide aerogel composite material for supercapacitors
Graphene oxide aerogel CuO Supercapacitor Self-assembly
2023/6/21
A cylindrical composite material of three-dimensional copper oxide/graphene oxide aerogel (3DCuO/GOA) has been successfully synthesized as a supercapacitor electrode material by a convenient one-step ...
中国地质大学科学技术发展院赵思佳(硕士研究生)，周克清*等，工程学院 Available online 25 April 2019，Composites Part A:Applied Science and Manufacturing, In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy
层状；二硫化钼；二维纳米；结构；优异
2021/10/20
近日，国际著名学术期刊《Composites Part A: Applied Science and Manufacturing》在线刊发了中国地质大学工程学院周克清副教授团队的研究成果——“In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy”。该文第一作者...
Porous Metal Oxide Materials Through Novel Fabrication Procedures
Hierarchical Structures Mesoporous Materials Microelectronics Nanoimprint Lithography Nanoparticles Supercritical Carbon Dioxide
2014/11/21
Porous metal oxide materials, particularly those comprised of silica or titania, find use in many applications such as low-k dielectric materials for microelectronics as well as chemical sensors, micr...
Self-Assembly of Block Copolymers for the Fabrication of Functional Nanomaterials
additive-driven self-assembly block copolymer directed self-assembly hierarchical pattern formation mesoporous silica film phase separation
2014/11/21
This dissertation explores the use of block copolymers which can self-assemble into different morphologies as templates to fabricate nanostructured materials. The first section (Chapters 2-4) reports ...
Superparamagnetic Ag@Fe3O4 core–shell nanospheres: fabrication, characterization and application as reusable nanocatalysts
Super paramagnetic Ag @ Fe3O4 clusters core-shell nanostructures ostwald
2015/3/30
Superparamagnetic Ag@Fe3O4 nanospheres with core–shell nanostructures have been prepared by a facile one-pot method. The diameter of the as-synthesized nanospheres was about 200 nm and the core sizes ...
An integrated polarized light guide was designed and fabricated for use as a liquid-crystal backlight with emphasis on uniformity of the light and conversion of p-polarized to s-polarized light. Two d...
Fabrication of hydrophobic inorganic coatings on natural lotus leaves for nanoimprint stamps
Lotus leaf Ion beam sputtering Nanoimprint lithography Nanoimprint Stamps
2011/9/13
Hydrophobic inorganic films were obtained by direct deposition of copper or silicon onto natural lotus by ion beam sputtering deposition technique.Scanning electron microscopy observations showed a lo...
Large-area fabrication of superhydrophobic surfaces for practical applications: an overview
Large-area fabrication superhydrophobic surfaces practical applications
2010/10/12
This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approac...
Fabrication of a thermoresponsive cell culture dish: a key technology for cell sheet tissue engineering
thermoresponsive cell culture dish a key technology cell sheet tissue engineering
2010/10/12
This article reviews the properties and characterization of an intelligent thermoresponsive surface, which is a key technology for cell sheet-based tissue engineering. Intelligent thermoresponsive sur...
Fabrication and characteristics of porous germanium films
germanium porous structured film visible photoluminescence
2010/1/19
Porous germanium films with good adhesion to the substrate were produced by annealing GeO2 ceramic films in H2 atmosphere. The reduction of GeO2 started at the top of a film and resulted in a Ge layer...
华南理工大学材料科学与工程导论课件Lecture-12 Design and Fabrication of Inorganic and Nonmetallic Materials
华南理工大学 材料科学与工程导论 课件 Lecture-12 Fabrication Inorganic Nonmetallic Materials
2009/12/7
华南理工大学材料科学与工程导论课件Lecture-12 Design and Fabrication of Inorganic and Nonmetallic Materials。
Fabrication and characterization of TiAl/Ti3Al-based intermetallic composites (IMCs) reinforced with ceramic particles
Composites TiAl
2010/8/16
TiAl/Ti3Al-based alloys have several advantages over conventional titanium alloys, such as higher elastic modulus, lower density, better mechanical properties at elevated temperatures, and higher oxid...
Fabrication of nano-structured materials by high-pressure sintering
Powder metallurgy Metal sintering Nanomaterials Crystallite size
2009/12/2
Purpose: The aim of this work was to fabricate nanocrystalline powders and high-density bulk materials using a sintering
method with limited grain growth so as to maintain nanocrystalline structure o...
Focus on Novel Nanoelectromechanical 3D Structures: Fabrication and Properties
Novel Nanoelectromechanical 3D Structures Fabrication Properties
2010/1/19
Microelectromechanical systems (MEMS) are widely used small electromechanical systems made of micrometre-sized components. Presently, we are witnessing a transition from MEMS to nanoelectromechanical ...