搜索结果: 1-6 共查到“工学 Solid-liquid”相关记录6条 . 查询时间(0.078 秒)
“Solid-Liquid” Vitrimers Based on Dynamic Boronic Ester Networks
Solid-liquid Dynamic covalent bond Boronic ester bond Strain-rate dependent High stretchability
2023/12/8
The “solid-liquid” behavior of vitrimers have not been systematically investigated. Herein, a series of “solid-liquid” vitrimers bearing varying contents of dynamic boronic ester bonds were synthesize...
Symposium EM3—Electronic and Ionic Dynamics at Solid-Liquid Interfaces
Electronic and Ionic Dynamics Solid-Liquid Interfaces
2016/7/18
When interfaces are formed at the junction between materials and liquids, surprising emergent dynamical properties not present in either parent phase can spontaneously coalesce at the interface. Examp...
Study of the Desulfurization Process and Gas-Solid-Liquid Phase Distribution under the Complex Humidification Conditions in Dense Tower
Composite Humidification Dense-Phase FGD Turbulence Intensity
2013/3/11
In making the gas-solid-liquid phase analysis, based on the collaborative study of the internal and external humidification ratio of desulfurization efficiency, determine the humidifier ratio within 6...
Water distribution at solid/liquid interfaces visualized by frequency modulation atomic force microscopy
Water distribution solid/liquid interfaces visualized frequency modulation atomic force microscopy
2010/10/12
Interfacial phenomena at solid/water interfaces play an important role in a wide range of industrial technologies and biological processes. However, it has been a great challenge to directly probe the...
Modelling of solid-liquid extraction process of total polyphenols from soybeans
solid-liquid extraction soybeans total polyphenols modelling optimisation
2014/2/27
The influence of the solvent, temperature, and extraction time on the extractability of total polyphenols from milled soybeans variety Ika was investigated. The study was performed in order to select ...
离心泵叶轮固液两相流动及泵外特性数值分析（Numerical Simulation of Solid-liquid Two-phase Turbulent Flow in Impeller Channel and Pump Characteristics Analysis）
离心泵 叶轮 固液两相流 数值模拟
2010/4/1
基于N-S方程和标准k-ε湍流模型，采用SIMPLEC法，对离心叶轮三维固液两相流场进行了耦合计算，得到了固相(颗粒)不同粒径、不同体积浓度不同密度以及不同流量时的固相(颗粒)浓度分布，并研究了外特性的变化规律。模拟结果表明，颗粒本身的性质-密度、粒径对颗粒的分布及运动规律影响较大，密度、粒径越大的颗粒在惯性力作用下易偏向工作面；颗粒体积浓度对颗粒的分布略有影响；泵在非设计工况下运行时，相对进口液...